|
Globe Flashing (Blinking) 1.5 Volt x 300mA Pk/100 (TS0835) At last a flashing globe that functions with a single AA battery! Micro Edison Screw in type flashlight globe that fits with standard bulb holders. Globes: round bulb single filament MES type 3.5V: Pk/100. (TS0865) These micro-Edison screw (MES) type globes, 3.5 V x 200mA are suitable for simple battery and bulb work. Globes 6Volt x 150mA MES clear Pk/100 (TS0875) Micro-Edison screw (MES) type globes 6.0 V x 150 mA, suitable for simple battery and bulb work. Note that these globes will light up using 4 x 1.5 V batteries or a 6 Volt lantern battery. Switch: slide switch miniature Each (TS0940) A very small switch with slide action. Suitable for elementary circuit work. Battery Snaps for 9Volt batteries and certain battery holders Pk/20 (TS1036) Battery snap connectors with short leads, snap direct to rectangular format 9 V batteries. Pack of 20 connectors. Switch: reed switch: Pk/ 10 (TS1051) A type of switch which is activated when a magnet comes close to the switch. Motor miniature with integral gearing. (1.5 - 6.0 volt.) Reduction ratio 1:10. each. (TS1092) A miniature DC motor and integral gearbox with a reduction ratio of 1:10. Motor miniature with integral gearing. (1.5 - 6.0 volt.) Reduction ratio 1:41, each. (TS1093) A miniature DC motor and integral gearbox with a reduction ratio of 1:41. Motor miniature with integral gearing. (1.5 - 6.0 volt.) Reduction ratio 1:157. each. (TS1094) A miniature DC motor and integral gearbox with a reduction ratio of 1:157 Motor: with open metal gearing. 3 volt by 25 rpm Each (TS1096) Motor; Low speed with metal gear box suitable for powering Marble Machines, Robots and similar devices Specifications;
Previous Page 1 2 3 4 [5] 6 Next Page
|